LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1636 (Engine Exhaust System) >> Repair Instructions >> Exhaust Manifold Heat Shield Replacement - Right Side (LZ4) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Engine Wiring Harness Electrical Connector
    GM1883804Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Remove the connector position assurance (CPA) retainer.
  3. Disconnect the engine wiring harness electrical connector (3) from the heated oxygen sensor (HO2S) electrical connector (2).
  4. Remove the HO2S electrical connector rosebud clip from the engine wiring harness retainer strap (6).
    5. Fig 2: Exhaust Manifold Heat Shield
    GM1889557Courtesy of GENERAL MOTORS CORP.
  5. Remove the exhaust manifold heat shield bolts (1).
  6. Remove the exhaust manifold heat shield (2).
scientia non olet · About LEMON Manuals