LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1636 (Engine Exhaust System) >> Repair Instructions >> Exhaust Manifold Heat Shield Replacement - Left Side (LZ4) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Heated Oxygen Sensors Electrical Connector
    GM1883806Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Remove the connector position assurance (CPA) retainer.
  3. Disconnect the engine wiring harness electrical connector (3) from the heated oxygen sensors (HO2S) electrical connector (2).
    4. Fig 2: Exhaust Manifold Heat Shield
    GM1889466Courtesy of GENERAL MOTORS CORP.
  4. Remove the exhaust manifold heat shield bolts (1).
  5. Remove the exhaust manifold heat shield (2).
scientia non olet · About LEMON Manuals