Installation Procedure
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Coat the valve lifters using prelube. Refer to Adhesives, Fluids, Lubricants, and Sealers .
- Install the valve lifters to the cylinder bores.
- Apply threadlock to the valve lifter guide bolt threads. Refer to Adhesives, Fluids, Lubricants, and Sealers .
- Install the valve lifter guides.
- Tighten the valve lifter guide bolts to 10 N.m (89 lb in).
- Install the valve rocker arms and pushrods. Refer to Valve Rocker Arm and Push Rod Replacement .
- Install the lower intake manifold. Refer to Lower Intake Manifold Replacement .
CAUTION:
Refer to Fastener Caution
.