Removal Procedure
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill Without HP5) or Cooling System Draining and Filling (GE 47716 Fill Without HP5) .
- Remove the spark plug wires from the right side of the vehicle.
- Remove the lower intake manifold. Refer to Lower Intake Manifold Replacement .
- Remove the valve rocker arms and pushrods from the right cylinder head. Refer to Valve Rocker Arm and Push Rod Replacement .
- Remove the right side exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side (LZ4) .
- Remove the spark plugs from the right side cylinder head. Refer to Spark Plug Replacement .
- Remove and discard the right side cylinder head bolts.
- Remove the right side cylinder head.
- Remove and discard the right side cylinder head gasket.
- Remove the right side cylinder head locator dowel pins, if necessary.
- Clean and transfer any parts as needed.