Upper Intake Manifold Installation

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Upper Intake Manifold, Bolts & Gasket

Courtesy of GENERAL MOTORS CORP.

Install the upper intake manifold gaskets and manifold.
Apply threadlock GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the upper intake manifold bolt threads.

CAUTION: Refer to Fastener Caution .

Install the MAP sensor bracket, upper intake manifold bolts and the upper intake manifold stud. Tighten the upper intake manifold bolts and stud to 25 N.m (18 lb ft).