Oil Pump Installation

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Crankshaft Oil Deflector & Nuts

Courtesy of GENERAL MOTORS CORP.

Install the crankshaft oil deflector.

CAUTION: Refer to Fastener Caution .

Install the crankshaft oil deflector nuts and tighten to 25 N.m (18 lb ft).

Fig 2: Identifying Oil Pump, Screen & Driveshaft

Courtesy of GENERAL MOTORS CORP.

NOTE: Do not reuse the oil pump driveshaft retainer. During assembly, install a NEW oil pump driveshaft retainer.

Install the oil pump.
Position the oil pump onto the pins.
Install the oil pump bolt attaching the oil pump to the rear crankshaft bearing cap, and tighten to 41 N.m (30 lb ft).