Camshaft Position Actuator Magnet Installation

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Camshaft Position Actuator Magnet & Bolts

Courtesy of GENERAL MOTORS CORP.

Install the camshaft position actuator magnet and O-ring seal into the front cover.

CAUTION: Refer to Fastener Caution .

Install the camshaft position actuator magnet bolts.
- Starting with the uppermost bolt, tighten the camshaft position actuator magnet bolts a first pass in a clockwise sequence to 10 N.m (89 lb in) .
- Starting with the uppermost bolt, tighten the camshaft position actuator magnet bolts a final pass in a clockwise sequence to 10 N.m (89 lb in) .