Seat Belt Does Not Retract
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Grab the seat belt webbing and slowly and firmly extract 15-25 mm (5/8-1 in) of webbing from the seat belt.
- Release the seat belt and allow the webbing to slowly retract back into the retractor.
- Check to see if the seat belt is released. If the seat belt is not released, repeat steps 1 and 2, two times more.
- If the retractor does not release after repeating the steps, replace with a new retractor.