Installation Procedure
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Install the rear transmission mount bracket (2).
- Install the rear transmission mount bracket bolts (1 and 4) and tighten to 50 N.m (37 lb ft).
- Install the rear transmission mount bracket bolts (3) and tighten to 100 N.m (74 lb ft).
- Install the heat shield bolts and shield and tighten the bolts to 10 N.m (89 lb in).
- Install the rear transmission mount. Refer to Transmission Rear Mount Replacement (FWD) or Transmission Rear Mount Replacement (AWD) .
CAUTION:
Refer to Fastener Caution
.