Manual Shift Shaft and Seal Replacement

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Manual Shift Shaft & Seal

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the battery tray. Refer to Battery Tray Replacement (HP7) . Remove the manual shaft and position switch assembly. Refer to Manual Shift Detent Lever with Shaft Position Switch Assembly Replacement .
1	Manual Shift Shaft Seal Tip: For seal removal use J 45201 . For seal installation use J-46626 . See Special Tools . Lubricate the manual shaft with automatic transmission fluid (ATF) to prevent damage to the manual shift shaft seal. Special Tools J 45201 Cooler Line Seal Remover J-46626 Seal Installer. See Special Tools .

Callout

Component Name

Preliminary Procedures

Remove the battery tray. Refer to Battery Tray Replacement (HP7) .
Remove the manual shaft and position switch assembly. Refer to Manual Shift Detent Lever with Shaft Position Switch Assembly Replacement .

Manual Shift Shaft Seal
Tip:

For seal removal use J 45201 .
For seal installation use J-46626 . See Special Tools .
Lubricate the manual shaft with automatic transmission fluid (ATF) to prevent damage to the manual shift shaft seal.

Special Tools

J 45201 Cooler Line Seal Remover
J-46626 Seal Installer. See Special Tools .