Torque Converter Fluid Seal Replacement

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Torque Converter Fluid Seal

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Torque Converter Fluid Seal CAUTION: Support the back side of the torque converter housing while installing the seal. Install the seal until it stops moving. Applying excessive pressure to the seal once it is seated could cause damage to the torque converter housing casting. Special Tools J 6125-1B: Slide Hammer with Adapter or equivalent J 23129: Universal Seal Remover J 38693: Seal Installer For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Torque Converter Fluid Seal

CAUTION: Support the back side of the torque converter housing while installing the seal. Install the seal until it stops moving. Applying excessive pressure to the seal once it is seated could cause damage to the torque converter housing casting.

Special Tools

J 6125-1B: Slide Hammer with Adapter or equivalent
J 23129: Universal Seal Remover
J 38693: Seal Installer

For equivalent regional tools, refer to Special Tools .