Drive Support Seal Installation

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Differential Transfer Drive Gear Support Seal

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Front Differential Transfer Drive Gear Support Seal Tip: A NEW seal must be installed. Special Tools: J-46624: Support Seal Installer For equivalent regional tools, refer to Special Tools .
2	Small Chamfer Faces Up CAUTION: To avoid damaging the seal, first place J 46624-1 with the small chamfer end facing up and leave in place for at least 60 seconds.
3	Large Chamfer Faces Up Tip: Turn J 46624-1 which is part of J-46624: seal installer, over with the large chamfer end facing up for 60 seconds to ensure that the seal has been properly sized.