Front Differential Drive Pinion Gear Bearing Cup and Lubricant Dam Replacement: Installation

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Differential Drive Pinion Gear Bearing Cup & Lube Dam

Courtesy of GENERAL MOTORS CORP.

Installation

Callout	Component Name
1	Front Differential Drive Pinion Gear Lube Dam Special Tools J 8092: Driver Handle J-46630: Lube Dam Installer For equivalent regional tools, refer to Special Tools .
2	Front Differential Drive Pinion Gear Bearing Cup CAUTION: Support the back side of the torque converter housing while installing the bearing cup. Install the bearing cup until it stops moving. Applying excessive pressure to the bearing cup once it is seated could cause damage to the torque converter housing casting. Special Tools: J-45087: Bearing Cup Installer For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Front Differential Drive Pinion Gear Lube Dam

Special Tools

J 8092: Driver Handle
J-46630: Lube Dam Installer

For equivalent regional tools, refer to Special Tools .

Front Differential Drive Pinion Gear Bearing Cup

CAUTION: Support the back side of the torque converter housing while installing the bearing cup. Install the bearing cup until it stops moving. Applying excessive pressure to the bearing cup once it is seated could cause damage to the torque converter housing casting.

Special Tools:
J-45087: Bearing Cup Installer
For equivalent regional tools, refer to Special Tools .