2-6 Clutch Piston Installation

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of 2-6 Clutch Piston

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	2-6 Clutch Piston Procedure: J-46621: seal protector prevents the piston seal lip from damage over the retaining ring groove during installation. Apply a thin coat of ATF to the O.D. of J-46621: seal protector to ease the installation of the piston. Special Tools: J-46621: Seal Protector For equivalent regional tools, refer to Special Tools .
2	2-6 Clutch Spring Assembly
3	2-6 Clutch Spring Assembly Procedure Install the retaining ring with the opening positioned to the top of the case cover. Place the retainer ring inside J-46632: spring compressor prior to placing J-46632: spring compressor onto the spring. Special Tools: J-46632: Spring Compressor For equivalent regional tools, refer to Special Tools .

Callout

Component Name

2-6 Clutch Piston
Procedure:
J-46621: seal protector prevents the piston seal lip from damage over the retaining ring groove during installation. Apply a thin coat of ATF to the O.D. of J-46621: seal protector to ease the installation of the piston.
Special Tools:
J-46621: Seal Protector
For equivalent regional tools, refer to Special Tools .

2-6 Clutch Spring Assembly

Procedure

Install the retaining ring with the opening positioned to the top of the case cover.
Place the retainer ring inside J-46632: spring compressor prior to placing J-46632: spring compressor onto the spring.

Special Tools:
J-46632: Spring Compressor
For equivalent regional tools, refer to Special Tools .