Installation Procedure
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Position the hinge to the vehicle with the marks made prior to removal.
- Install the hinge to door bolts.
Tighten: Tighten the bolts to 25 N.m (18 lb ft).
- Install the hinge to body bolts.
Tighten: Tighten the bolts to 36 N.m (27 lb ft).
- Inspect the door for proper alignment. Refer to Rear Side Door Adjustment .
CAUTION:
Refer to Fastener Caution
.