Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (without Power Seat)

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Driver Seat And Passenger Seat Outer Adjuster Finish Cover

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the seat adjuster handle. Refer to Driver or Passenger Seat Adjuster Handle Replacement . Remove the front seat recliner handle. Refer to Driver or Passenger Seat Recliner Handle Replacement .
1	Front Seat Outer Adjuster Finish Cover Screw CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb in)
2	Front Seat Outer Adjuster Finish Cover Procedure Release the rear of the adjuster cover first. Pull outward from the bottom of the adjuster cover and push upward to release the cover from the seat cushion frame.

Callout

Component Name

Preliminary Procedures

Remove the seat adjuster handle. Refer to Driver or Passenger Seat Adjuster Handle Replacement .
Remove the front seat recliner handle. Refer to Driver or Passenger Seat Recliner Handle Replacement .

Front Seat Outer Adjuster Finish Cover Screw

CAUTION: Refer to Fastener Caution .

Tighten: 2 N.m (18 lb in)

Front Seat Outer Adjuster Finish Cover

Procedure

Release the rear of the adjuster cover first.
Pull outward from the bottom of the adjuster cover and push upward to release the cover from the seat cushion frame.