Driver or Passenger Seat Inner Adjuster Finish Cover Replacement

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Driver Seat And Passenger Seat Inner Adjuster Finish Cover

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front seat. Refer to Front Seat Replacement - Bucket .
1	Front Seat Inner Adjuster Finish Cover Screw CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb in)
2	Front Seat Inner Adjuster Finish Cover Procedure Release the rear of the adjuster cover first. Pull outward from the bottom of the adjuster cover and push upward to release the cover from the seat cushion frame.

Callout

Component Name

Preliminary Procedure:
Remove the front seat. Refer to Front Seat Replacement - Bucket .

Front Seat Inner Adjuster Finish Cover Screw

CAUTION: Refer to Fastener Caution .

Tighten: 2 N.m (18 lb in)

Front Seat Inner Adjuster Finish Cover

Procedure

Release the rear of the adjuster cover first.
Pull outward from the bottom of the adjuster cover and push upward to release the cover from the seat cushion frame.