Rear Side Door Lower Molding Replacement

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Side Door Lower Molding

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Open either the LR or RR door assembly to assist with the removal process. Remove the 1 rear side door lower front molding nut securing the molding to the inner door.
1	Lower Door Molding Locator Pin Procedure Align the front pin to the door. Align the retainers and apply pressure to secure the molding to the lower door. Install the rear door lower molding nut and finger tighten.
2	Lower Door Molding Retainer (Qty: 10) Procedure: Release the lower retainers working upward on the molding.
3	Lower Door Molding Assembly Tip: Ensure the door is in the closed position prior to installing the lower molding to the door.