LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1600 (Drive Axles - Front) >> Repair Instructions >> Vent Hose Connector Replacement - Front Drive Axle (Ratcheting Style) >> Installation

Vent Hose Connector Replacement - Front Drive Axle (Ratcheting Style): Installation

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 GMC Sierra, 2002 Chevrolet Tahoe, and 2002 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
  1. Rotate the propeller shaft until the differential case window can be seen through the vent hose connector opening.
    Fig 1: Locating Differential Case Window
    GM834274
  2. Place the alignment arm of the vent hose connector in the 6 o'clock position.
    Fig 2: Locating Alignment Arm
    GM834277
  3. Install the vent hose connector with the alignment arm in the 6 o'clock position into the vent hose connector opening.

    Tighten 

    Tighten the vent hose connector to 28 Nm (21 lb ft).

  4. Connect the vent hose to the vent hose connector.
  5. Install the left tire and wheel assembly. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION .
  6. Lower the vehicle.
  7. Place the transmission in PARK.
  8. Release the park brake.
scientia non olet · About LEMON Manuals