Inspection Procedure
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 GMC Sierra, 2002 Chevrolet Tahoe, and 2002 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Perform the following before disassembling the axle:
- Remove the drain plug from the axle.
- Drain the axle lubricant.
- Inspect the oil and the case for metal chips.
Determine the source of the metal chips, such as a broken gear or bearing cage.
- Check the ring gear backlash. Refer to BACKLASH INSPECTION AND ADJUSTMENT .
This information can be used in order to determine the cause of the axle problem. The information will also help when setting up and Preloading the differential case.
Determine the cause of the axle problem before disassembly, if possible.