Installation Procedure
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the seals and replace if damaged using Kent Industries adhesive backed foam tape P/N 46485 (or equivalent).
- Install the RH air outlet duct to the instrument panel retainer.
- Install the RH air outlet duct screws to the instrument panel retainer.
Tighten: Tighten the screws to 1 N.m (9 lb in).
- Install the instrument panel upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement .
NOTE:
Refer to Fastener Notice
.