LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1585 (Seat Belt System) >> Repair Instructions >> Seat Belt Height Adjuster Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Shoulder Belt Height Adjuster
    GM964654Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
    IMPORTANT: Apply Permatex® 24200 on all restraint fasteners prior to installation.
  1. Install the shoulder belt height adjuster with the fasteners.

    Tighten:  Tighten the fasteners to 40 N.m (30 lb ft).

  2. Install the center pillar upper garnish molding. Refer to Center Pillar Lower Garnish Molding Replacement .
  3. Operate the shoulder belt to ensure proper installation.
scientia non olet · About LEMON Manuals