LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1584 (Engine Mechanical - 2.4L (Lat)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Drive Belt Tensioner Spring Tool, Belt And Tensioner
    GM1809412Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  2. Install the EN-48079  (1) to the drive belt tensioner spring. See Special Tools .
  3. Compress the drive belt tensioner spring fully using the EN-48079  (1). See Special Tools .
  4. Install a box wrench to the drive belt tensioner (2) and rotate the tensioner counterclockwise in order to release the tension from the drive belt.
  5. With the tensioner released, remove the drive belt from under the middle idler pulley.
  6. Slowly rotate the tensioner clockwise in order to allow the tensioner to rest.
  7. Remove the drive belt from the vehicle.
scientia non olet · About LEMON Manuals