LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1584 (Engine Mechanical - 2.4L (Lat)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Drive Belt Tensioner Spring Tool, Belt And Tensioner
    GM1809412Courtesy of GENERAL MOTORS CORP.
  1. Install and position the drive belt around all of the pulleys except for the middle idler pulley.
  2. Install a box wrench to the drive belt tensioner (2) and rotate the tensioner counterclockwise in order to release the tensioner.
  3. Install the drive belt under the middle idler pulley.
  4. Slowly rotate the tensioner clockwise in order to allow the tensioner to rest against the drive belt.
  5. Loosen the forcing bolt on the EN-48079  (1) and remove from the drive belt tensioner spring. See Special Tools .
  6. Ensure that the drive belt tensioner idler is fully seated against the drive belt.
  7. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
scientia non olet · About LEMON Manuals