Tools Required
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
EN-46745 Piston Pin Retainer Remover and Installer
- Disassemble the piston rings. Use a suitable tool to expand the rings. The piston rings must not be reused.
- Remove the piston pin retainers using the EN-46745 .
- Remove the piston pin.
CAUTION:
Handle the piston carefully. Worn piston rings are sharp and may cause bodily injury.
IMPORTANT:
Two retainers hold the piston pins in place. No special tools are required to remove the piston pins. Ensure that the piston pin is not damaged. Do not reuse the retainers.