LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1584 (Engine Mechanical - 2.4L (Lat)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Crankshaft Balancer Removal >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

J 38122-A  Crankshaft Balancer Holder

    Fig 1: Preventing Crankshaft Rotation Using Special Tool
    GM1828030Courtesy of GENERAL MOTORS CORP.
  1. Install the J 38122-A  .
  2. Remove the balancer retaining bolt and washer. Use the J 38122-A  and a breaker bar to prevent the crankshaft from rotating when loosening the bolt.

    Discard the bolt.

    3. Fig 2: Crankshaft Balancer Assembly
    GM1828035Courtesy of GENERAL MOTORS CORP.
  3. Remove the crankshaft balancer assembly.
  4. Remove and discard the friction washer.
scientia non olet · About LEMON Manuals