Circuit Description

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Each cylinder is monitored individually for a misfire condition and can set a cylinder specific diagnostic trouble code (DTC). The powertrain control module (PCM) uses the crankshaft position (CKP) sensor and camshaft position (CMP) sensors to determine engine misfire. The CKP sensor and the CMP sensors monitor their respective components and evaluate changes in the crankshaft rotational speed for each cylinder. Irregular changes in the crankshaft rotational speed indicate a possible misfire. The malfunction indicator lamp (MIL) illuminates when the misfire rate equals or exceeds a pre-determined count. A misfire rate that is high enough can cause the catalytic converter to overheat under certain driving conditions. The MIL will flash ON and OFF when the conditions for catalytic converter overheating are present.