LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1545 (Engine Controls And Fuel - 2.2L (L61) - Introduction (2 Of 2)) >> Repair Instructions >> Evaporative Emission Canister Purge Solenoid Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of EVAP Purge Solenoid Into The Retaining Bracket
    GM897669Courtesy of GENERAL MOTORS CORP.
  1. Slide the EVAP purge solenoid into the retaining bracket.
  2. Connect the purge line quick connects to the EVAP purge solenoid. Push in the connector until a slick is heard, then pull back to confirm positive engagement.
  3. Connect the EVAP purge solenoid harness connector.
scientia non olet · About LEMON Manuals