LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Engine Controls - Removal, Overhaul & Installation) >> Engine Sensors & Switches >> Engine Coolant Temperature Sensor >> Installation

Engine Coolant Temperature Sensor: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Whenever ECT sensor is removed, coat threads with Sealer (12346004) before reinstallation. Install ECT sensor into engine and tighten to specification. See TORQUE SPECIFICATIONS .
  2. Reconnect harness connector to ECT sensor. Reconnect negative battery cable. Fill and bleed cooling system. See COOLING SYSTEM BLEEDING  under COOLING SYSTEM.
scientia non olet · About LEMON Manuals