LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Engine Controls - Removal, Overhaul & Installation) >> Emission Systems & Sub-Systems >> EVAP Canister Purge Solenoid >> Removal (8.1L)

Removal (8.1L)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen bolt on intake manifold sight shield at top of engine. Remove intake manifold sight shield from top of engine. Disconnect EVAP canister purge solenoid harness connector. See Figure.
  2. Slide retaining tab on EVAP purge pipe connection to release position and disconnect EVAP purge pipe from EVAP canister purge solenoid. Remove EVAP canister purge solenoid retaining bolt. Remove EVAP canister purge solenoid.
scientia non olet · About LEMON Manuals