LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1537 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Transmission Cooler Line Seals Removal >> Tool Required

Tool Required

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

J 45201  Cooler Line Seal Removal. See Special Tools .

    Fig 1: Inserting J 45201 Into Cooler Line Seal Bore
    GM822722Courtesy of GENERAL MOTORS CORP.
  1. Insert J 45201  collet (2) fully into the cooler line seal bore. See Special Tools .
  2. Insert the forcing screw piece of the J 45201  (1) into J 45201  (2) and tighten. See Special Tools .
    3. Fig 2: Removing Cooler Line Seal With J 45201
    GM822724Courtesy of GENERAL MOTORS CORP.
  3. Thread the J 45201  collar (2) onto J 45201  (3) and tighten until the tool has removed the seal. See Special Tools .
  4. Use a pair of pliers to remove the cooler line seal from J 45201  . See Special Tools .
scientia non olet · About LEMON Manuals