LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1537 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Manual Shift Shaft, Detent Lever, and Park Lock Removal

Manual Shift Shaft, Detent Lever, and Park Lock Removal

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Parking Lock Actuator Assembly & Manual Shaft And Detent Lever Assembly
    GM20209Courtesy of GENERAL MOTORS CORP.
  1. Remove the manual shaft to transmission case pin (803).
    2. IMPORTANT: The parking lock actuator assembly (807) remains attached to the manual shaft and detent lever until the assembly is removed.
  2. Remove the manual shaft and detent lever assembly (806) by pushing the manual shaft into the transmission case (51). The parking lock actuator assembly (807) remains attached to the detent lever until you remove the manual shaft and detent lever assembly.
    3. NOTE: Do not damage the case bore during removal of the manual shift shaft seal.
  3. Remove the manual shaft seal (809) from the case (51).
scientia non olet · About LEMON Manuals