Park/Neutral Position Switch Removal
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the range selector lever position switch shield bolt (64) and the range selector lever link cover (63).
- Bend the locking tab on the range selector lever washer (47) from the range selector lever nut (49).
- Remove the range selector lever nut (49).
- Remove the lock washer (47) and the spring washer (48).
- Remove the range selector lever (45).
- Bend the lock tabs of the park/neutral position switch washer (43).
- Using an adjustable wrench, hold the manual shift shaft (932) and remove the park/neutral position (PNP) switch nut (46).
- Remove the washer (43).
- Remove the 2 PNP switch bolts (44).
- Remove the PNP switch assembly (42) from the transmission case (31).