LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1536 (Automatic Transmission - 5AT - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Holding Fixture Removal

Holding Fixture Removal

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Attaching DT 46238 To Transaxle Assembly
    GM1203345Courtesy of GENERAL MOTORS CORP.
  1. Properly support and secure the transaxle assembly with the torque converter housing facing in the upright position.
  2. Remove the transaxle assembly from the transaxle repair station / build stand.
  3. Remove the 6 transaxle holding fixture mounting bolts.
  4. Remove the transaxle holding fixture from the automatic transaxle assembly.