Removal Procedure
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the engine wiring harness bracket (40) and engine wiring harness bolt (39).
- Remove the 4th clutch pressure switch harness (952) from the 4th clutch pressure switch.
- Remove the 4th clutch pressure switch (5) and the 4th clutch pressure switch seal (4) from the top of the transmission case (31).
- Remove the 3rd clutch pressure switch (25) and the 3rd clutch pressure switch seal (26) from the side of the transmission case (31).
- Inspect the fluid pressure switches for damage. Replace the switches if faulty.