LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1536 (Automatic Transmission - 5AT - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> 1st/Coast Clutch Apply Fluid Collar Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: 1st/Coast Clutch Apply Fluid Collar & 1st/2nd Clutch Shaft Shim
    GM1203908Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not damage the O-ring seals during installation.
  1. Lube the O-ring seals and the transmission case bore.
  2. Install the 1st/coast clutch apply fluid collar assembly (76) into the transmission case bore (31), aligning the fluid collar tab to the transmission case.
  3. Install the 1st/2nd clutch shaft shim (74) into the transmission case.