LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1536 (Automatic Transmission - 5AT - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> 1st/Coast Clutch Apply Fluid Collar Replacement >> Disassembly Procedure

Disassembly Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Coast Clutch Apply Fluid Pipe Guide Plate & Components Removed
    GM1203907Courtesy of GENERAL MOTORS CORP.
  1. Remove the coast clutch apply fluid pipe guide plate retaining ring (75).
  2. Remove the coast clutch apply fluid pipe guide plate (73).
  3. Remove the coast clutch apply fluid pipe guide plate outer O-ring seal (72).
  4. Remove the coast clutch apply fluid pipe guide plate inner O-ring seal (71).
  5. Remove the coast clutch apply fluid pipe (70).
  6. Remove the 1st and coast clutch apply fluid collar O-ring seals (77).
  7. Inspect, clean, and replace the components as needed.

    The coast clutch apply fluid pipe (70) and the fluid feed pipe guide plate (73) are not serviced separately.