Assembly Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Coast Clutch Apply Fluid Pipe Guide Plate & Components Removed

Courtesy of GENERAL MOTORS CORP.

Install 2 NEW 43.5 x 2.2 mm O-ring seals (77) on the 1st clutch apply fluid collar assembly (76).
Align the apply fluid pipe tabs with the tab slots in the collar and install the coast clutch apply fluid pipe (70).
Install the coast clutch apply fluid pipe guide plate inner O-ring seal (71) and the coast clutch apply fluid pipe guide plate outer O-ring seal (72) to the coast clutch apply fluid pipe guide plate (73).
Install the coast clutch apply fluid pipe guide plate (73).
Install the coast clutch apply fluid pipe guide plate retaining ring (75).