LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1536 (Automatic Transmission - 5AT - Introduction (2 Of 2)) >> Description and Operation >> Electronic Component Description >> Transaxle Inputs >> Park/Neutral Position (PNP) Switch

Park/Neutral Position (PNP) Switch

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Park/Neutral Position (PNP) Switch
GM1254672Courtesy of GENERAL MOTORS CORP.

The park/neutral position switch assembly and is mounted on the transmission manual shaft. The transmission range (TR) switch is part of the park/neutral position switch assembly. The TR switch is a multi-signal switch. The powertrain control module (PCM) supplies ignition voltage to the TR switch on 7 signal circuits, P, R, N, D, I, L, and Forward Range. Each gear selector lever position grounds one or more of the signal circuits in a unique pattern. In order to determine the gear range selected by the driver, the PCM compares the voltage combination on the signal circuits to a TR switch combination table stored in memory. Refer to Transmission Range Switch Logic .