Removal Procedure
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the oil level indicator.
- Remove the oil fill cap.
- Remove the positive crankcase ventilation (PCV) valve and bolt. Refer to Crankcase Ventilation Hoses/Pipes Replacement .
- Disconnect the ignition wiring harness from the ignition coils and retaining bracket.
- Remove the wiring harness bracket bolt from the cylinder head.
- Remove the bolts (708), and ignition coils (707).
- Remove the bolts (543), grommets (544), valve cover (542) and gasket (541).
- Remove the seals (540), if required.