LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1526 (Engine Mechanical - 3.5L (L66)) >> Repair Instructions >> On Vehicle Repair Instructions >> Oil Pan Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Pan
    GM1227162Courtesy of GENERAL MOTORS CORP.
  1. Clean the oil pan and engine block sealing surfaces.
  2. Apply sealant evenly to the oil pan mating surface of the engine block. Refer to Sealers, Adhesives, and Lubricants  for the correct part number.
  3. Install the oil pan to the engine.
    4. NOTE: Refer to Fastener Notice .
  4. Install the oil pan bolts.

    Tighten

    • Tighten the bolts, a first pass to 6 N.m (53 lb in).
    • Tighten the bolts, a second pass to 12 N.m (106 lb in).
  5. Install the rear engine cover.
  6. Install the crossunder exhaust pipe brace.
  7. Install the crossunder exhaust pipe. Refer to Exhaust Manifold Pipe Replacement (3.5L (L66)) .
  8. Refill the engine with oil and adjust the oil level.
  9. Start the vehicle and inspect for oil leaks.
scientia non olet · About LEMON Manuals