Valve Rocker Arm Cover Installation - Right Side

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Wiring Harness Bracket Bolt

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install NEW seals (540), NEW gasket (541), cover (542), NEW grommets (544) and bolts (543).

Fig 2: View Of Valve Rocker Arm Cover Bolt Tightening Sequence

Courtesy of GENERAL MOTORS CORP.

Tighten the bolts in sequence.
Tighten: Tighten the bolts to 12 N.m (106 lb in).
Apply anti-seize compound GM P/N 21485279 to the threads of the spark plugs.

Fig 3: Identifying Valve Rocker Arm Cover

Courtesy of GENERAL MOTORS CORP.

Install the spark plugs (706).
Tighten: Tighten the spark plugs to 18 N.m (13 lb ft).
Install the ignition coils (707) and bolts (708).
Tighten: Tighten the bolts to 12 N.m (106 lb in).