Engine Front Mount Bracket Installation

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Engine Mount Bracket

Courtesy of GENERAL MOTORS CORP.

Install the mount bracket (722).

IMPORTANT: 3 bolts retain the mount bracket to the engine. Apply sealant to the threads of the lower bolt only.

Apply sealant Saturn P/N 21485277, GM P/N 12345382, (Canadian P/N 10953489), or equivalent, to the bolt (721) threads.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the bolts.
Tighten: Tighten the bolts to 44 N.m (33 lb ft).