Removal & Installation
WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .
- Remove front seats. Fold console compartment up. Remove rear cup holder. Remove console trim plate. Remove screws from center console. Remove center console. To install, reverse removal procedure. Tighten front seat bolts to specification. See TORQUE SPECIFICATIONS . Activate air bag system.