Installation Procedure
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- If the panel is being replaced, Install the U-nuts.
- Install the outer door panel on the door structure.
- Install the outer door panel fasteners. Tighten in the sequence shown.
Tighten: Tighten the fasteners to 8 N.m (71 lb in).
- Install the rear outer belt sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
- Install the rear outside door handle. Refer to Rear Side Door Outsider Handle Replacement .
NOTE:
Refer to Fastener Notice
.