LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1512 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Hood Replacement
    GM929291Courtesy of GENERAL MOTORS CORP.
  1. With an assistant, position the hood to the hinges.
  2. Align the hood hinges to the alignment marks on the hood.
    3. NOTE: Refer to Fastener Notice .
  3. Install the bolts that secure the hinge to the hood.

    Tighten:  Tighten the bolts to 25 N.m (18 lb ft).

  4. Install the hood insulator, if equipped. Refer to Hood Insulator Replacement .
  5. Adjust the hood. Refer to Hood Adjustment .
  6. Remove the protective covering from the fenders.
  7. Remove the support and close the hood.
scientia non olet · About LEMON Manuals