LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1512 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Rear Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rear Hood Seal
    GM930855Courtesy of GENERAL MOTORS CORP.
  1. Position the hood rear seal to the vehicle.
  2. Push the hood rear seal onto the cowl panel flange in order to fully seat the seal.
  3. Verify hood seal fits flush against the hood rear side seals.
scientia non olet · About LEMON Manuals