LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1511 (Bumpers And Fascias) >> Repair Instructions >> Rear Bumper Impact Bar Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Impact Bar Replacement - Rear Bumper
    GM931310Courtesy of GENERAL MOTORS CORP.
  1. Position the impact bar to the rear end structure.
    2. NOTE: Refer to Fastener Notice .
  2. Install the rear impact bar to structure bolts.

    Tighten:  Tighten the bolts to 25 N.m (18 lb ft).

  3. Install the energy absorber. Refer to Rear Energy Absorber Replacement .
  4. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
scientia non olet · About LEMON Manuals