Action Taken When the DTC Sets

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

The PPS will set a DTC 034, then communicate with the SDM via non class 2 circuit.
The PPS may also set DTC 056 indicating a PPS internal system fault has occurred.
The SDM will set DTC B0092.
The SDM disables the module (IPM) deployment loop.
The PPS will turn ON the passenger air bag status OFF indicator.
The SDM commands the AIR BAG indicator ON via class 2 serial data.