Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Instrumental Panel (I/P) Compartment Door

Courtesy of GENERAL MOTORS CORP.

Remove the I/P compartment door cover.
Insert the key into the I/P compartment lock cylinder and rotate the cylinder clockwise 90 degrees. The cylinder will stop and the retainer tumbler will be visible.

Fig 2: Depressing Retainer Tumbler With Thin Bladed Screwdriver

Courtesy of GENERAL MOTORS CORP.

Depress the retainer tumbler with a thin flat-bladed tool.

Fig 3: Removing & Installing Lock Cylinder

Courtesy of GENERAL MOTORS CORP.

Rotate the lock cylinder an additional 90 degrees and remove the lock cylinder.